Camp library

Guides

Plain language, no jargon, no brand cheerleading — the fundamentals we wish someone had explained on day one.

Bambu Lab basics

New to a Bambu A1, P1, or X1? Start here — setup, the AMS, and the quirks worth knowing.

Box to a clean first layer: calibration, washing the plate, textured vs smooth plates, and what good looks like.

What the four-spool feeder does, what to keep out of it, and the one big myth — it's not a dryer.

Something came out wrong? Find the symptom, get the fix — most likely cause first.

The three real causes of bed-adhesion failure — a dirty plate, wrong nozzle height, a rushed first layer — with a fix for each.

Stringing solved in the order that works: dry the filament, drop the temperature, then tune retraction.

Corners lifting off the bed? Beat shrinkage with warm, even cooling and a base that grips.

The 45° rule, overhangs vs bridges, tree vs normal supports, clean removal — and how to design them out.

The things about filament nobody explains properly on day one.

The rule that answers 90% of cases, the honest strength comparison, and what PETG demands in return.

Flexible filament without the frustration: the three rules, starting settings, and what to print first.

The $0 fix for rough, stringy, crackling prints — temperatures and times for every material, plus storage that works.

Looking for material-specific temperatures and settings? That's thefilament settings library. Prefer answers over reading? TheFilament Pickerand Print Cost Calculatorget you there in under a minute.